Favorite powder for 45 ACP
Forum Information
You will earn 3 pts. per new topic and 1.5 pts. per new post (reply) in this forum.
You will earn 3 pts. per new topic and 1.5 pts. per new post (reply) in this forum.
-
- Posts: 97
- Joined: Tue Mar 26, 2019 8:57 pm
- Location: Rotterdam, Darra, Istanbul
- Gun: Colt detective speci
- Likes given: 3
- Likes received: 12
- Contact:
- Status: Offline
Favorite powder for 45 ACP
I load a lot of 45 ACP. Primarily practice rounds with 200 or 230 grain FMJ bullets. The powders I use are Unique, Power Pistol, No. 5 and 800-X.
HS-6 is a 9mm major load, I would definitely not be loading a 124 to 1340fps out of a factory block barrel. That is begging for trouble, the unsupported chamber can (will) cause a case failure and possible detonation, which will probably destroy your gun. I have seen too many cracked Glock frames, slides, barrels... All from doing stupid stuff when loading. 9mm Major or similar +P+ loadings are dangerous without a fully supported chamber. Be careful.
Regards
ARMARIN
I load a lot of 45 ACP. Primarily practice rounds with 200 or 230 grain FMJ bullets. The powders I use are Unique, Power Pistol, No. 5 and 800-X.
HS-6 is a 9mm major load, I would definitely not be loading a 124 to 1340fps out of a factory block barrel. That is begging for trouble, the unsupported chamber can (will) cause a case failure and possible detonation, which will probably destroy your gun. I have seen too many cracked Glock frames, slides, barrels... All from doing stupid stuff when loading. 9mm Major or similar +P+ loadings are dangerous without a fully supported chamber. Be careful.
Regards
ARMARIN
IF YOU SHOOT IN THE DARK USE A MACHINE GUN
Read ==>
Read ==>