MOA - Is It Greek?

All firearms discussion that doesn't fit anywhere else goes here. Armed citizen reports, gun news, etc.
Forum Information
You will earn 3 pts. per new topic and 1.5 pts. per new post (reply) in this forum.
User avatar

Topic Author
ARMARIN

Journeyman (Level II)
Posts: 97
Joined: Tue Mar 26, 2019 8:57 pm
Location: Rotterdam, Darra, Istanbul
Gun: Colt detective speci
Likes given: 3
Likes received: 12
Contact:
Status: Offline

Posting Badges

#1

Post by ARMARIN » Sat Mar 30, 2019 4:31 pm

MOA - Is It Greek?

Your friend tells you that his rifle shoots one MOA. Is your friend speaking Greek? No, he is speaking the language of hunters and shooters.

Your friend is telling you that his rifle has an accuracy of one inch at 100 yards. MOA refers to Minute Of Angle. We know that a circle has 360 degrees. One degree has 60 minutes. Take two staright lines that start at one point and open up with an angle of 1/60 degree or one minute of arc. As the distance from the starting point gets farther, the distance between the two lines becomes larger. At a distance of 100 yards from the starting point, the two lines will be one inch apart from each other. Actually the distance is a bit larger than one inch. It is about 1.047 inch. Commonly it is referred to as one inch.

Rifle scope and peep sight manufacturers usually graduate their equipment for elevation and windage in fractional increments of MOA - usually 1/4 minute (but not always). A change of one click/mark on a scope or peep sight will translate into a change of 1/4 inch at a distance of 100 yrds.

For scope and peep sights graduated in 1/4 minutes, use the following to determine the change of impact point for the distance given for one click/mark on scope or peep sight. Also shown is the number of clicks/marks required to move impact point by one inch.

25 Yards - 1/16 inch. One inch = 16 clicks/marks
50 Yards - 1/8 inch. One inch = 8 clicks/marks
75 Yards - 3/16 inch. One inch = 6 clicks/marks
100 Yards - 1/4 inch. Once inch = 4 clicks/marks
150 Yards - 3/8 inch. One inch = 3 clicks/marks
200 Yards - 1/2 inch. One inch = 2 clicks/marks
400 Yards - 1 inch. One inch = 1 click/mark


(Used TASCO info report as inspiration for this)
Regards
ARMARIN


IF YOU SHOOT IN THE DARK USE A MACHINE GUN
Read ==>

User avatar

Cranky

Apprentice (Level III)
Posts: 44
Joined: Wed Aug 30, 2017 12:55 pm
Gun: .357 MAG
Likes given: 12
Likes received: 6
Status: Offline

Posting Badges

#2

Post by Cranky » Sun Mar 31, 2019 8:12 am

Great info for newcomers.

User avatar

Biglever

Master (Level I)
Posts: 198
Joined: Sat Nov 11, 2017 4:00 pm
Location: An old beaver swamp in up state NY
Likes given: 2
Likes received: 22
Status: Offline

Posting Badges

#3

Post by Biglever » Wed Nov 18, 2020 4:59 pm

Thanks for that scale, very helpful.

Post Reply Previous topicNext topic
  • Similar Topics
    Replies
    Views
    Last post