Kriss Vector SDP-SB .45 ACP Pistol – Review

Feed from AmmoLand
Forum Information
You will earn 1.5 pts. per new post (reply) in this forum.

**Registered members may reply to any topic in this forum**
User avatar

Topic Author
NHGF [Feed]

Posts: 15079
Joined: Mon Oct 30, 2017 5:16 pm
Status: Offline

Posting Badges


Post by NHGF [Feed] » Tue Aug 25, 2020 12:19 pm

ImageKriss Vector SDP-SBU.S.A.-( When production began on the original version of the Kriss Vector in 2009, the originality of the “Kriss Super V” recoil mitigating action promised to reinvigorate a SBR/PDW market that had been largely phased out by agencies adopting short carbines instead.  While the resulting “splash” in the marketplace wasn't as revolutionary as the folks at Kriss may have hoped, the years between then and now have seen significant refinement and expansion within the Vector lineup.  Now a few years old, I'm reviewing the Kriss Vector SDP-SB, one of their braced pistol versions of the Vector, chambered in .45 ACP. We're going to dive into range results with the Kriss Vector SDP-SB (Special Duty Pistol, SB Tactical brace), but first let's check out the tech specs on this gun, as provided by Kriss:
  • Model:  Vector SDP-SB
  • Caliber:  .45 ACP (9mm, .40 SW, 10mm available)
  • Magazines:  Uses Glock mags
  • Barrel Length:  5.5″
  • Overall length:  24.25″
  • Operating System:  Closed Bolt, Delayed Blowback
  • Action Type:  Semi-Auto
  • Color:  Black
  • Weight:  6.7 lbs
  • Barrel Material:  4140 Chrome Moly Steel
  • Barrel Finish:  Black Nitride QPC
  • Twist Rate:  1:10″ RH
  • Barrel Thread Pitch:  M16x1 LH
  • Trigger Type:  Pivoting, Single Stage
  • Calibers:  Versions Available In 9mm, 40 S&W, 10mm, .22lr
ImageKriss Vector SDP-SBGetting the SDP-SB ready for the range, I strapped on a Primary Arms SLx MD-25 red dot, and loaded up a few boxes of HSM 230 gr FMJ's.  This is a good red dot with a wide field of view, well suited to my preference for such a gun.  The ammo is re-manufactured from Hunting Shack Munitions, of which I still have a couple thousand rounds left from when I closed my gun shop to move out of state.  It's reliable ammo, and shoots more accurately than I usually expect from budget ammo. ImageKriss Vector SDP-SBI did a few dry fire drills to get used to the ergonomics, which are like a “greatest hits” compilation of so many guns that came before it.  The charging handle is forward and left (much like the Mp5), but also folds forward when not used (like the G3).  The mag release is on the left side of the magazine well, right next to the bolt hold/release paddle.  While there's a forward picatinny rail section for forward grips/finger stops, it's clear the team designed this gun to be held with the support hand on the magwell.  The safety is in the same region as nearly every PCC/subgun has put it in the last 80 years, easily reachable by the firing hand's thumb. ImageKriss Vector SDP-SBSo out to the range I went with the SDP-SB in tow.  I got a rough zero at 8 yards, then pushed the target back to 15 yards for a tighter zero and a couple groups.  Another couple groups at 25 yards, then some reflexive fire on a CTS steel mini e-type target.  All groups were shot from a standing position, which isn't optimal of course.  Still, I was happy with the below results: ImageCalled flyer on the leftImageImage What's it like firing the Vector?  Well, there's something to that Super-V firing system all right.  Not that one really expects a lot of recoil from a .45 ACP braced pistol, but this is a pretty efficient system.  The gun doesn't recoil so much as it pulses in your hands… kind of a mild concussive force with a minimal amount of muzzle rise.  The unusual recoil pattern makes it more difficult to perceive the last round bolt lock, but with practice, it's there. ImageKriss Vector SDP-SBI was surprised to find this gun has a hell of a muzzle blast, far more so than any of my .45 ACP chambered handguns.  Likely a byproduct of the unique firing system, but easily remedied right?  Silly I hadn't read the barrel thread pitch specs before hitting the range, so call me surprised to find a left-hand twist metric thread pattern instead of the 5/8×24 more commonly used.  No quiet time for me, but still one hell of a fun gun. That muzzle thread is my one big gripe with the SDP-SB.  I could point to the weight as well, but that one is a little more understandable than an American-made gun sticking with a metric thread pattern The Kriss Vector series of guns brought a new and innovative operating system to the firearms world.  Kriss is continuing to refine the system, which is already an effective method of mitigating recoil.  I'd really like to see them bring the shelved Kriss KARD pistol out, showing that the Super-V recoil system isn't just a pistol caliber carbine one-trick-pony.  I think the system shows great promise and potential beyond where it's currently at, but I digress.  The Kriss SDP-SB is an effective and fun way to sling pistol caliber rounds downrange.  This is a unique addition to nearly any collection.  The SDP-SD as shown has an MSRP of $1519, with a street price that has varied wildly as of late due to the pending election season.  If you're in the market for a little carbine/pistol/subgun in a pistol caliber, the Kriss Vector series is a pretty potent package.  Just make sure to get a few of the 30-round mags so you can keep the fun rolling.  Check it out! About Rex Nanorum Image Rex Nanorum is an Alaskan Expatriate living in Oregon with his wife and kids. Growing up on commercial fishing vessels, he found his next adventure with the 2nd Bn, 75th Ranger Regt. After 5 tours to Afghanistan and Iraq, he adventured about the west coast becoming a commercial fisheries and salvage SCUBA diver, rated helicopter pilot instructor (CFII) and personal trainer, before becoming a gear reviewer and writer.” -Jens “Rex Nanorum” Hammer @Rexnanorum

  • Similar Topics
    Last post